Omnitrix Badge — Official Symbol Accessory
Our Omnitrix badge captures the iconic watch-face symbol in a wearable metal pin designed for fans who want to carry that hero energy everywhere. This isn’t a flimsy printed sticker — we engineered a die-struck zinc alloy badge with hard enamel inlay, matching the green-and-black color scheme down to the shade.
We chose zinc alloy for its balance of weight and durability — heavy enough to feel substantial in your palm, light enough to wear all day without sagging fabric. The die-striking process embosses the Omnitrix symbol into the metal before enamel application, creating crisp edges that won’t blur over time.
Sizing & Placement Options
The 1.5-inch diameter works across a range of surfaces — we’ve seen customers pin it to denim jackets, canvas messenger bags, baseball caps, and even the shoulder strap of tactical packs. The circular footprint keeps the symbol centered and recognizable from across a room.
Pin Back Mechanics
Our butterfly clutch uses a dual-spring system that grips the pin shaft from two angles. Push the badge through your fabric, slide the clutch on until it clicks, and the springs compress to hold. We tested it on 12-ounce canvas and lightweight nylon — both stayed secure through a full washer cycle and air dry. The included rubber cap covers the sharp pin tip when the badge is stored loose in a drawer or travel pouch.
Care & Maintenance
Wipe the enamel surface with a damp microfiber cloth to remove dust and fingerprints. Avoid abrasive cleaners or scouring pads — they can dull the polished metal borders. If the pin shaft picks up lint, pull the clutch off and rinse the shaft under warm water, then dry completely before reattaching.
Store the badge flat in a cool, dry place when not in use. The enamel won’t crack from normal handling, but dropping it onto concrete can chip the edges. We recommend keeping it pinned to a dedicated display board or fabric organizer rather than tossing it loose in a bag with keys and other metal objects. The protective rubber cap prevents accidental pokes and preserves the pin point sharpness.
Badge specifications
Complete Your Hero Collection
Customer reviews
Omnitrix Badge Questions
The pin shaft is smooth stainless steel with a tapered point, so it slides through most woven fabrics without snagging threads. We recommend testing on an inside seam first if you’re pinning to silk or very thin knits. For delicate materials, consider placing a small fabric square on the inside as a backing layer to distribute pressure.
Yes, the zinc alloy and enamel construction are TSA-friendly. Metal detectors may register it, but it’s small enough that security typically waves you through once they see it. If you’re concerned, remove the badge from your jacket and place it in the bin with your keys and phone during screening.
Grip the clutch firmly with your thumb and index finger, then pull straight back along the pin shaft. Avoid twisting or rocking it side to side. If it feels stuck, slide a fingernail under one edge of the clutch to break the initial grip, then pull. The dual-spring design releases cleanly when you apply even backward pressure.
We color-matched the green and black to the animated series reference frames, verified against production stills. The green has a slight metallic sheen from the enamel polish, which makes it pop under indoor lighting. Some fans prefer this richer look over a flat matte green. If you want a side-by-side comparison, the product photos show the badge next to a printed reference card.
Rubbing alcohol is safe for the enamel and metal surfaces. Dampen a cotton swab with isopropyl alcohol and gently rub any sticky residue or fingerprint smudges. Let it air dry for a minute before reattaching the clutch. Avoid soaking the entire badge in liquid — water can seep behind the enamel if the seal has microscopic gaps.
The pin shaft and butterfly clutch are both stainless steel, which resists rust in normal wet conditions. If you wear the badge in heavy rain, dry it with a soft cloth afterward to prevent water spots on the enamel. We tested it through multiple wash cycles and saw no corrosion, but prolonged submersion in saltwater or chlorinated pools isn’t recommended.
This Omnitrix badge is produced in-house by our team and represents our interpretation of the iconic symbol. We design and manufacture every piece to match the quality fans expect from official merchandise. All colors, proportions, and symbol details are researched from original series artwork to ensure authenticity.